Mgo sandwich panel production line

Product description:

Structural Insulated Panel (SIP) is a high performance building system for residential and light commercial construction. This product is a panel composed of expanded Polystyrene insulation (EPS) board laminated between Magnesium Oxide boards(Mgo boards).

SIP is manufactured under factory controlled conditions and can be fabricated to fit nearly any building design. The result is a building system that is extremely strong, energy efficient and cost effective. Building with SIPs will save you lots of time and cost.

Specification:

The Color choice:

Color of Mgo board : White , Grey

Color of EPS : White,Grey

Color of XPS : blue

The Dimension choice:

Mgo board thickness : 3mm-20mm

EPS thickness :20mm - 200mm

XPS thickness :20mm-90mm

The Density choice :

Mgo board density :950kg/m3 - 1200kg/m3

EPS density : 18kg/m3 - 25kg/m3

XPS density : 18kg/m3-28kg/m3

Advantages of the Mgo sandwich panel production line:

1. Simple raw material, no regional restrictions (cement, river sand, fly ash, all kinds of insulation materials, chopped fiber or glass fabric and so on), after one-time processing forming. Production technology is simple, low cost, less investment, quick effect.

2. High grade of automation,easy operation(operators through simple training can mount quard), low labour intensity, assembly line working, no noise, no pollution, no "three-waste" emissions in production process.

3. Low energy consumption, no need of high temperature, high pressure in production process,the products would be one-step molding in normal temperature, no special requirements for production conditions.

4. According to the different requirements of different customers, our equipments can produce different specification (length, width, height), all kinds of insulation board of different materials, to meet the needs of different consumers.

Mgo sandwich panel production line

Mgo sandwich panel machine adopts the automatic template device to save the labour cost. It also adopts automatic coating release agent system, by this way the release agent is evenly, less dosage and clean. Roller and forming roller precision is high that makes the board uniform thickness and smooth. Automatic cutting film system adopts fixed length cutting method, cutter does not hurt the template.

1. production line

Mgo sandwich panel and Mgo board making machine can produce all kinds of Magnesium Oxide boards, they can be used for ceiling, wall skirting, decorating of indoor wall and lining board for furniture. It can replace three-ply board, five-ply board, flake board, MDF (Medium Density Fiberboard ) and Gypsum Board. It is really environment product and lower cost.

2. Raw material and cost analysis

The product is formed with crushed crop straw or sawdust and some inorganic chemical materials at one time after roller-extruding. The source of raw materials is widely and they are purchased easily for customers.

3. Technology features

There is not any requirement about high temperature and high pressure during production processing. The board will be formed at one time after roller-extruding under the conditions of normal temperature and normal pressure. This is a green environmental-protection project, because that there is no waste water, waste materials and waste gas during its production processing. The finished board doesn't need high temperature drying, air-drying and watering, and under the normal temperature, they will dry well indoor.

4. Equipment Model and Product Specification

According to different production, our equipment has 6 models for large-scale, middle-scale and small-scale. Our all equipment can produce board with same quality and specification but different production.

The board with the thickness of 2-60mm, the biggest width of 1, 300mm and unlimited length. So you can adjust the thickness of board at will. The standard specification of the board is 1.22mX2.44m.

5. After-sale

After purchased the equipment, we will teach relevant technology for free, and will go to your factory for installation and testing until you can produce the qualified product by yourself. Our company will train 2-3 technical personnel for free until he can get the skill. We will take responsibility for provide technical consultation and following-up service for a long time, the equipment warranty period is one year.

Service Process

Business communication→Customer visiting→Layout design→Sign contract→Foundation design & Manufacturing→Inspection&No material testing→Installation→Commissioning

1. Customer visiting

When you visit us, not only you can talk with engineer about requirement and technical questions, also check our production capability. You can also visit our other projects, to see how they produce wall panel. So you are welcomed to visit us.

2.Designing the initial Layout

We will design the initial layout and design production line configuration for your project, so you can know the land you need and your investment on machinery .

3.Sing the Contract.

4.Foundation Drawing

We will design the foundation for you, and provide within 15 days after confirming order. Then you start foundation accordingly.

Value Added Service:

We will prepare all this to help our customer running the production line

1. Spare parts for free

2. Spare parts list-Paid

3. Installation tool list

4. Operating manual

Follow Up Service:

After the completion of the project, we will continue to provide services to help customers purchase raw materials and accessories. If there is any problem in the production, we will give customers a satisfactory answer within 24 hours. If necessary, we will arrange engineers to help customers solve the problem on site.